Water mist sprayed over a stack of inflated boards.

01Weihai, Shandong · OEM & ODM

Inflatable boards, built to your spec

We run the line in Weihai for importers, private-label brands and rental fleets.

Start a brief Walk the line

Every board holds stack pressure for 48 hours before it is cleaned and packed.

10–15 days for a sample · 45 days to first run

02The line

Twelve stations, one board at a time.

Glue by hand, heat at the rail, pressure at the roller and a spray test at every seam.

  1. 01Edge buffing
  2. 02Rail band cutting
  3. 03Rail band glue
  4. 04Inner rail bonding
  5. 05First inflation
  6. 06Outer rail welding
  7. 07Seam trimming
  8. 08Leak test
  9. 09Deck pad glue
  10. 10Roller pressing
  11. 11Final cleaning
  12. 12Folding and packing

22 stages on record · 12 main line · 10 details

Process & QC

03What you set

Outline, print, pad, bundle.

Sampling takes 10 to 15 days, then the first run follows in 45.

  • 01Outline
  • 02Deck print
  • 03Pad pattern
  • 04Colour
  • 05Bundle
Adhesive being brushed onto a board deck inside a taped outline.
Adhesive goes down inside the masked pad outline.
Hot-air nozzle welding a printed rail band onto the side of a board.
The rail carries the print, the impact margin and the seam in one band.

04On file

Three documents, with the numbers as issued.

Send the shape, the deck and the run.

Open the brief Talk to the plant

Brief

What are we building?

This form prepares your brief in this browser. Nothing leaves the page until you copy it.