03Single model · 11′6″

The 11′6″ all-round.

One length that carries a first-time rider and a fleet rotation at the same time.

01Build sheet

Length	11′6″
Construction	Hand-glued drop-stitch deck and hull
Rail	Hot-air welded PVC band, trimmed under pressure
Deck pad	EVA pad, glued inside a masked outline, roller pressed
Leak test	Every seam sprayed; 48-hour stack hold before release
Test standard	EN 25649-1:2017
Certificate	WUX202302270543SC
Bundle	Backpack, pump, paddle, leash, fin, pouch, dry bag, repair kit

Width, thickness, volume and rider limits are set per order, so they are not listed here.

A scraper trimming overflow glue along a printed rail band. — The rail is scraped back to a clean line while the board is still under pressure.

02On the line

What the rail goes through.

The band is cut to the curve, glued by hand, reactivated with hot air and pressed down in sections.

A long strip of PVC band being cut with shears on a work table. — The inner band is cut to the outline of the board.

Adhesive being brushed onto a board from a red bucket. — Adhesive is brushed on and left to open before the band goes down.

Hot-air gun and steel plate bonding the inner rail. — Hot air reactivates the glue; the steel plate closes the seam.

A board being rolled and strapped with orange webbing. — Foam on the fold points, then rolled and strapped.

03Ships as a bundle

One box, ready to hand over.

The board folds into a backpack with the pump, paddle, leash, fin, phone pouch, dry bag and repair kit inside. Put your label on the box and it goes straight to the shelf.

Want this length in your print?

Open the brief Board range